one development module, three standards: bluetooth classic, bluetooth low energy and ant? . this unique triple mode etu C thats etu for easy-to-use C module plugs directly into panasonic development kits, texas instruments msp430 and stellaris experimenter boards with the added beneft of header connectors that simplify prototype wiring and feld trials. the pan1323etu is the development environment for the pan13xx family*. this family is based upon texas instruments cc256x integrated circuits and uses a host controlled interface (hci), a cost effective and fexible means to implement a bluetooth network. hci reduces bom cost by eliminating redundant processing capacity and giving designers the fexibility to work with a controller of their choosing, as the bluetooth stack resides and executes on the applications host processor. bluetooth low energy and ant are ultra-low power network standards. the foundations of bluetooth low energy power consumption are short messages and establishing very fast connections (few ms). using these techniques, energy consumption is reduced to a tenth of a classic bluetooth network. ant is a wireless sensor network protocol operating in the 2.4 ghz spectrum, designed for ease of use, effciency and scalability, ant supports peer-to-peer, star, tree and fxed mesh topologies. product performance: ? the pan1323etu is the development tool for panasonics entire pan13xx product line.* ? a single development module for three standards: bluetooth classic, bluetooth low energy and ant. - bluetooth version 4.0 - ant is a wireless sensor network protocol designed for ultra-low power applications - bluetooth low energy average power consumption is about 1 ua. ? cost effective and fexible hci interface ? easily integrates to texas instruments msp430 and stellaris arm7 controllers ? extraordinary range with 10 dbm of tx power pan1323etu part numbers: part numbers description enw-89825a2jf pan1323etu, evaluation module new product introduction copyright ? 2011 panasonic corporation of north america. all rights reserved. specifcations are subject to change without notice. pan1323etunpi, fy11-042-xxx www.panasonic.com/ rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 new! pan1323etu bluetooth ? development module pan1323etu triple mode simplifes the development environment new product introduction series antenna bluetooth le ant compatibility pan1323etu x x x x - PAN1315 x 100% pan1316 x x pan1317 x x pan1325 x x 100% pan1326 x x x pan1327 x x x pan1323etu triple mode compatibility: p i design and specifcations are subject to change without notice. ask the factory for technical specifcations before purchase and/or use. if there is any doubt regarding the safety of this product, kindly inform us immediately for technical consultation. pan1450 rev. a w ireless m odules the pan1450 provides wireless interface per the bt 1.2 specifcation. interoperability and bt compliance testing have been completed for the bt chip zv4301 from zeevo, inc. to facilate rapid time-to-market. the bt chip incorporates a widely popular 32-bit arm7tdmi tm cpu core with suffcient bandwidth to support a wide range of embedded controller applications and the module provides full arm7 software development access. the pan1450 is manufactured in a 13,4 x 18,7 x 2,2 mm3 smd package and the only external component needed is an 50 ohm antenna. any customizations for the software can be handled with our recommended partners. overview - inquiry results with rssi (1.2) - adaptive frequency hopping (afh) enabled (1.2) - high throughput (>600 kbps) - hold-, park- and sniffmode - up to 128 bit encryption - audio capability on an sco channel - support for very low power modes - sleep and deep sleep - all bluetooth data rates (up to 57,6/723,2kbps) user interfaces - full-speed usb version 2.0 compliant - programmable baud rate uart (9,6 kbps - 921,6 kbps) - debug uart (duart) - 16 general purpose i/os (interruptible) - pcm audio (1 channel) - spi and jtag interface radio features - high sensitivity design (-86 dbm typ.) - integrated rf shield - class 2 module (0dbm typ. output power) - one antenna port features outlines - enw89803j p r o d u c t q u a l i f i e d b l u e t o o t h b01839 bluetooth-module pan1450 cut the cable tm * references in this document are restricted to ti cc256x based modules and do not include the pan1321
pan1323etu triple mode simplifes the development environment new product introduction copyright ? 2011 panasonic corporation of north america. all rights reserved. specifcations are subject to change without notice. pan1323etunpi, fy11-042-xxx www.panasonic.com/ rfmodules piccomponentsmarketing@us.panasonic.com 1-800-344-2112 applications: parameter value condition / notes receiver sensitivity (ber=10 -3 ) -93 dbm gfsk, typical, dirty tx on output power 10 dbm vdd_in = vbat power supply 1.7 - 4.8 v battery or dc/dc ultra low power scan 135 u a 1.28s interval gfsk dh1\dh5 33 ma full throughput operating temperature range -20c to + 70c -40c to + 85c optional technical specifcations for pan1323etu: block diagram pan1323etu: ? sports and fitness ? heart rate monitor ? blood pressure sensor ? blood glucose meter ? thermometer ? assisted living ? flood alarm ? heating control ? automatic key control ? thermometer ? industrial sensors ? toys ? entertainment devices ? mobile accessories ? all bluetooth wireless applications new product introduction
|
